Msti - Dell C9000 Series Reference Manual

msti

Configure multiple spanning tree instance, bridge priority, and one or multiple VLANs mapped to the MST
instance.
C9000 Series
Syntax
msti instance {vlan range | bridge-priority priority}
To disable mapping or bridge priority, use the no msti instance {vlan range |
bridge-priority priority} command.
Parameters
msti instance
vlan range
bridge-priority
priority
Defaults default bridge-priority is 32768.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Enter the MSTP iInstance. The range is from zero (0) to 63.
Enter the keyword vlan then the identifier range value. The
range is from 1 to 4094.
Enter the keywords bridge-priority then a value in
increments of 4096 as the bridge priority. The range is from zero
(0) to 61440.
Valid priority values are: 0, 4096, 8192, 12288, 16384, 20480,
24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248,
57344, and 61440. All other values are rejected.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Multiple Spanning Tree Protocol (MSTP) 1427