Show Ip Ospf Statistics - Dell C9000 Series Reference Manual

show ip ospf statistics

Display OSPF statistics.
C9000 Series
Syntax
show ip ospf [process-id | vrf vrf-name] statistics global |
[interface name {neighbor router-id}]
Parameters
process-id
vrf vrf-name
global
interface name
neighbor router-
id
Defaults none
Command Modes
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first OSPF
process.
Enter the keyword vrf and the name of the VRF to display
statistics corresponding to the OSPF process that is tied to a
specific VRF.
Enter the keyword global to display the packet counts received
on all running OSPF interfaces and packet counts OSPF
neighbors receive and transmit.
(OPTIONAL) Enter the keyword interface then one of the
following interface keywords and slot/port or number
information:
•
•
•
•
•
•
•
•
(OPTIONAL) Enter the keyword neighbor then the neighbor's
router-id in dotted decimal format (A.B.C.D.).
• EXEC
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
For a Null interface, enter the keywords null 0.
For a Port Channel interface, enter the keywords port-
channel then a number.
For a tunnel interface, enter the keyword tunnel then the
tunnel ID. The range is from 1 to 16383.
For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Open Shortest Path First (OSPFv2 and OSPFv3) 1556