Usage Information The following example displays the CSP session information for the port extenders. The
command output shows the following information:
Example
Dell#show pe csp
------------------------------------------------------------------------------
------------------------------------------------------------------------------
show pe errors
Display the port extender error logs.
C9000 Series
Syntax
show pe errors
Default
None
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
In the following example, the Te 1/16 is added as a cascade interface in PE 9, but Te1/16 is
connected to a different PE, which is not provisioned. Hence, the cascade interface is kept in
error state.
Example
Dell#show pe errors
PE-id: Not Assigned
•
TxPDUSemStatus shows the next port extender CSP PDU TX state machine
status.
•
RxPDUSemStatus shows the last port extender CSP PDU RX state machine status.
•
LocalReqSemStatus shows the port extender CSP local request state machine
status.
•
RemoteReqSemStatus shows the port extender CSP remote request state
machine status
--
Port Extenders CSP Information
PE-id
TxPDUSemStatus
254
WAIT_TX
•
EXEC
•
EXEC Privileged
Description
Introduced on the C9010.
--
RxPDUSemStatus
LocalReqSemStatus
WAIT_RX
RemoteReqSemStatus
RESP_RECVED
Port Extenders (PE)
SEND_RESP
1727