Dell C9000 Series Reference Manual page 947

Version
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.2.1.0
Usage Information In the Examples, the delta column displays changes since the last screen refresh.
The following are the monitor command menu options.
Key
systest-3
monitor time
time
m
c
b
r
l
a
T
t
q
Example
Dell# monitor interface fortyGigE 2
Interface
Out Packets
Description
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the host name assigned to the system.
Displays the amount of time since the monitor interface
command was entered.
Displays the amount of time the chassis is up (since last reboot).
Change the view from a single interface to all interfaces on the
line card or visa-versa.
Refresh the view.
Change the counters displayed from Packets on the interface to
Bytes.
Change the [delta] column from change in the number of
packets/bytes in the last interval to rate per second.
Change the view to the next interface on the line card, or if in
line card mode, the next line card in the chassis.
Change the view to the previous interface on the line card, or if
in line card mode, the previous line card in the chassis.
Increase the screen refresh rate.
Decrease the screen refresh rate.
Return to the CLI prompt.
Dell Networking operating system uptime is 3 minute(s)
Monitor time: 00:00:00
Link
Fo 2/4 Up
Refresh Intvl.: 2s
In Packets
[delta]
2
[delta]
Interfaces 947