Show Frrp - Dell C9000 Series Reference Manual

Version
7.4.1.0
Usage Information This command places you into the resilient ring protocol. After executing this
command, the command line prompt changes to conf-frrp.

show frrp

Display the resilient ring protocol configuration.
C9000 Series
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
ring-id
summary
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage Information Executing this command without the optional ring-id command clears the statistics
counters on all the available rings. The system requires a command line confirmation
before the command executes. This command clears the following counters:
Description
Introduced
Enter the ring identification number. The range is from 1 to 255
(OPTIONAL) Enter the keyword summary to view just a
summarized version of the Ring configuration.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
• hello Rx and Tx counters
Force10 OS Resilient Ring Protocol (FRRP) 892