Clear Ip Bgp Flap-Statistics - Dell C9000 Series Reference Manual

The clear ip bgp dampening command does not clear the history paths.

clear ip bgp flap-statistics

Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
C9000 Series
Syntax
clear ip bgp [vrf vrf-name] [ipv4 [multicast | unicast] | ipv6
unicast] [flap-statistics [ipv4-address mask | ipv6–address mask]
| filter-list as-path-name | regexp regular-expression]
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
ipv4-address
mask
ipv6–address
mask
filter-list as-path-
name
regexp regular-
expression
(OPTIONAL) Enter the keyword vrf and then the name of the
VRF to clear BGP flap statistics corresponding to that VRF.
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to clear information related only to ipv4 multicast
routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to clear information related only to ipv4 unicast
routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to clear information related only to ipv6 unicast
routes.
(OPTIONAL) Enter an IPv4 address in dotted decimal format and
the prefix mask in slash format (/x) to reset only that prefix.
(OPTIONAL) Enter the IPv6 address followed by the network
mask to reset only that prefix.
(OPTIONAL) Enter the keywords filter-list then the name
of a configured AS-PATH list.
(OPTIONAL) Enter the keyword regexp then regular
expressions. Use one or a combination of the following:
• . = (period) any single character (including a white space).
• * = (asterisk) the sequences in a pattern (0 or more
sequences).
• + = (plus) the sequences in a pattern (1 or more
sequences).
Border Gateway Protocol 445