Show Software Ifm - Dell C9000 Series Reference Manual

show software ifm

Display interface management (IFM) data.
C9000 Series
Syntax
show software ifm {clients [summary] | ifagt number | ifcb
interface | linecard slot-id | trace-flags}
Parameters
clients
summary
ifagt number
ifcb interface
linecard slot-id
trace-flags
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Enter the keyword clients to display IFM client information.
(OPTIONAL) Enter the keyword summary to display brief
information about IFM clients.
Enter the keyword ifagt then the number of an interface agent
to display software pipe and IPC statistics.
Enter the keyword ifcb then one of the following interface IDs
then the slot/port information to display interface control block
information for that interface:
•
•
•
Enter the linecard slot-id parameters to specify the switch
ports on a line card. The range of slot IDs is from 0 to 11.
Enter the keyword trace-flags to display IFM information for
internal trace flags.
• EXEC
• EXEC Privilege
For a Port Channel interface, enter the keyword port-
channel then a number: The range is from 1 to 128.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Control and Monitoring 165