Ip Control-Plane Egress-Filter; Show Ip Accounting Access-List - Dell C9000 Series Reference Manual

ip control-plane egress-filter

Enable egress Layer 3 ACL lookup for IPv4 CPU traffic.
C9000 Series
Syntax
ip control-plane egress-filter
Defaults Not enabled.
Command Modes
EXEC Privilege
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0

show ip accounting access-list

Display the IP access-lists created on the switch and the sequence of filters.
C9000 Series
Syntax
show ip accounting {access-list access-list-name | cam_count}
interface interface
Parameters
access-list-name
cam_count
interface interface
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Enter the name of the ACL to be displayed.
List the count of the CAM rules for this ACL.
Enter the keyword interface then the one of the following
keywords and slot/port or number information:
Access Control Lists (ACL) 274