Dell C9000 Series Reference Manual page 136

all
brief
Command Modes
•
•
Command History
Version
9.9(0.0)
8.1.1.0
7.5.1.0
E-Series
Usage Information
show linecard
output
Line card
Status
Next Boot
Required Type
Current Type
Hardware Rev
Num Ports
Up Time
Dell Networking
OS Version
Jumbo Capable
Boot Flash Ver
Memory Size
(OPTIONAL) Enter the keyword all to view a table with
information on all present line cards
(OPTIONAL) Enter the keyword brief to view an abbreviated
list of line card information.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Original command.
Description
Field
Displays the line card slot number (only listed in the show
linecard all command output).
Displays the line card's status.
Displays whether the line card is to be brought online at the next
system reload.
Displays the line card type configured for the slot. The Required
Type and Current Type must match. If they do not match, use
the linecard command to reconfigure the line card type.
Displays the line card type installed in the slot. The Required
Type and Current Type must match. If they do not match, use
the linecard command to reconfigure the line card type.
Displays the chipset revision.
Displays the number of ports in the line card.
Displays the number of hours and minutes the card is online.
Displays the operating software version.
Displays Yes or No indicating if the line card can support Jumbo
frames.
Displays the two possible Bootflash versions. The [Booted]
keyword next to the version states which version was used at
system boot.
List the memory of the line card processor.
Control and Monitoring 136