Timer - Dell C9000 Series Reference Manual

Example
Dell# show frrp summary
(Summary)
Ring-ID State Mode
----------------------------------------------
2
31
50
Dell#
Example (1)
Dell# show frrp 1
Ring protocol 1 is in Master mode
Ring Protocol Interface:
Primary : TenGigabitEthernet 0/16 State: Forwarding
Secondary: Port-channel 100 State: Blocking
Control Vlan: 1
Ring protocol Timers: Hello-Interval 50 msec Dead-Interval 150
msec
Ring Master's MAC Address is 00:01:e8:13:a3:19
Topology Change Statistics: Tx:110 Rx:45
Hello Statistics: Tx:13028 Rx:12348
Number of state Changes: 34
Member Vlans: 1000-1009
Dell#
Example (2
Dell# show frrp 2 summary
Summary)
Dell# show frrp 2 summary
Ring-ID State Mode
-----------------------------------------------
2
Dell#
Related protocol frrp
Commands

timer

Set the hello interval or dead interval for the Ring control packets.
C9000 Series
Syntax
timer {hello-interval milliseconds}| {dead-interval milliseconds}
To remove the timer, use the no timer {hello-interval [milliseconds]}|
{dead-interval milliseconds} command.
• Topology change Rx and Tx counters
• The number of state change counters
UP Master
UP Transit
Down Transit
Up Master 2
— enters the resilient ring protocol and designate a ring identification.
Ctrl_Vlan Member_Vlans
2 11-20, 25,27-30
31 40-41
50 32
Ctrl_Vlan Member_Vlans
11-20, 25, 27-30
Force10 OS Resilient Ring Protocol (FRRP) 893