Debug Ip Bgp - Dell C9000 Series Reference Manual

Version
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0

debug ip bgp

Display all information on BGP, including BGP events, keepalives, notifications, and updates.
C9000 Series
Syntax
debug ip bgp [ vrf vrf-name | A.B.C.D | X:X:X:X::X | peer-group
peer-group-name] [in | out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
vrf vrf-name
A.B.C.D
X:X:X:X::X
peer-group peer-
group-name
in
out
A.B.C.D
X:X:X:X::X
dampening
events
ipv4
ipv6
keepalives
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the keyword vrf and then the name of the VRF to debug
BGP information corresponding to that VRF.
NOTE: Use this attribute to debug BGP protocol
operations corresponding to either a default or non-
default VRF.
Enter the IPv4 address of the neighbor in dotted decimal format.
(OPTIONAL) Enter an IPv6 address.
Enter the keywords peer-group then the name of the peer
group to debug.
(OPTIONAL) Enter the keyword in to view only information on
inbound BGP routes.
(OPTIONAL) Enter the keyword out to view only information on
outbound BGP routes.
Enter the IP address of peer in the A.B.C.D format.
Enter the IPv6 IP address of peer in the X:X:X:X::X format.
Enter the keyword dampening to view BGP dampening.
Enter the keyword events to view BGP protocol events.
Enter the ipv4 IP address to view the IPV4 route information.
Enter the ipv6 IP address to view the IPV6 route information.
Enter the keyword keepalives to view BGP keepalives.
Border Gateway Protocol 448