Ip Community List Commands; Ip Community-List - Dell C9000 Series Reference Manual

IP Community List Commands

Use the following commands to configure IP community lists on the switch.

ip community-list

Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
C9000 Series
Syntax
ip community-list comm-list-name
To delete a community-list, use the no ip community-list comm-list-name
command.
Parameters
comm-list-name
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
6.1.1.0
Example
Dell(conf)#ip community-list TestComList
Dell(config-community-list)#
Enter a text string as the name of the community-list, up to 140
characters.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters. Prior
to 7.8.1.0, names are up to 16 characters long.
Introduced on the E-Series.
Access Control Lists (ACL) 392