Dell C9000 Series Reference Manual page 163

Usage Information
Field
Status
Next Boot
Card Type
Hardware Rev
Num Ports
Up Time
Last Restart
Dell Networking
OS Version
Jumbo Capable
CP Boot Flash
RP Boot Flash
CP Mem Size
RP Mem Size
Temperature
Power Status
Voltage
Part Num
Vendor ID
Date Code
Country Code
Example
Dell#show rpm 0
-- RPM card 0 --
Status
Next Boot
Description
Displays the RPM's status.
Displays whether the RPM is to be brought online at the next
system reload.
Displays the RPM catalog number.
Displays the hardware revision level.
Displays the number of active ports.
Displays the number of hours and minutes since the RPM's last
reboot.
States the reason for the last RPM reboot.
Displays the operating software version.
Displays a Yes or No indicating if the RPM is capable of sending
and receiving Jumbo frames.
This field does not indicate if the chassis is in Jumbo mode; for
that determination, use the show chassis brief command.
Displays the two possible Boot Flash versions for the control
processor. The [Booted] keyword next to the version states
which version was used at system boot.
Displays the Boot Flash version for the Routing Processor. The
[Booted] keyword next to the version states which version was
used at system boot.
Displays the memory of the control processor.
Displays the memory of the Routing Processor.
Displays the temperature of the RPM. Minor alarm status if the
temperature is over 65°C.
Lists the status of the power modules in the chassis.
Displays the power rails for the line card.
Displays the line card part number.
Displays an internal code, which specifies the manufacturing
vendor.
Displays the line card's manufacturing date.
Displays the country of origin. 01 = USA.
: active
: online
Control and Monitoring 163