Link-Bundle-Monitor Enable; Link-Bundle-Distribution Trigger-Threshold - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

show ip cam stack-unit

an S-Series switch.

link-bundle-monitor enable

Provides a mechanism to enable monitoring of traffic distribution on an ECMP link bundle.

link-bundle-monitor enable

To exit from ECMP group mode, use the exit command.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 9.0.0.0

Provides a mechanism to set the threshold to trigger when traffic distribution begins being monitored on

an ECMP link bundle.

link-bundle-distribution trigger-threshold [percent]

To exit from ecmp group mode, use the exit command.

– Display content-addressable memory (CAM) entries for

PORT-CHANNEL INTERFACE

Introduced on the S6000.

Introduced on the Z9000.

Introduced on the S4820T.

Introduced on the S4810.

Indicate the threshold value when traffic distribution starts

being monitored on an ECMP link bundle. The range is from

1 to 90%. The default is 60%.

Equal Cost Multi-Path (ECMP)