Onhook Transfer - Panasonic DBS 824 Installation Manual

Onhook Transfer FFI
Onhook Transfer
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FFl 2# 1# 8# (0 or l)#
Description
Onhook Transfer allows a user to transfer a call by placing the c&l on hold,
dialing the extension number, and then hanging up. If Onhook Transfer is
disabled, the user transfers the call by placing it on hold, dialing the extension
number, then pressing PROG, and hanging up.
Programming
FFl 2# 1# 8# (0 or 1)#
A
O=Onhook Transfer is disabled.
l=Onhook Transfer is enabled.
Related Programming
Attendant Transfer Recall Timer for CO Calls: FFl 3# 4##
.
ExtensionTransfer Recall Tier for CO Calls: FFl 3# 5#
Attendant Transfer Recall limer for Intercom Calls: FFl 3# 20#+
Extension Transfer Retail Timer for Intercom Calls: FFl 3# 2 l#
Notes
CaU
Transfers.
Both intercom calls and trunk calls can be onhook-
transferred.
Transfer Recalls.
If a transferred call recalls to an extension and is not
answered, it will automatically transfer to the attendant. The timing for the
transfer to the attendant is controlled by the Attendant Call Reversion Timer
(FFl 3# 8#).
Onhook Transfer Setting With The VAU.
If a Voice Announce Unit (VAU)
is used, Onhook Transfer must be enabled.
Page
1-12
DBS 824-10-400 issued 3/l/95