Panasonic DBS 824 Installation Manual page 420

Digital business system
Hide thumbs Also See for DBS 824:
Table of Contents

Advertisement

Site
Date
Page -
of
These forms may be reproduced as needed by certified DBS Dealers and Technicians.
Introduction
This document contains the DBS 824 Programmin g h-ms and Tables. These tables are useful in
planning and configuring a DBS 824 Installation.
These tables are organized as follows:
Section 1 - System Settings (FFl)
Section 2 - Trunk Settings (FF2)
Section 3 - Extension Settings (FF 3)
Section 4 - Ringing and Hunt Groups (FF4)
Section 5 - FF Key Programming (FF5)
Section 6 - Name and Message Assignments (FF6 and FFIO)
Section 7 - Toll Restriction Settings (FF7)
Section 8 - Least Cost Routing (FF 8)
The programming forms and tables are in the same general order as the programming telephone pro-
gramming structure. However,
some tables are combined to group related
information. For instance,
the Speed Dial names (FF6 3#) and Speed Dial numbers (FFlO 2#) are recorded on the same tables
(see Tables 19 and 20).
Also, some items in the tables
may be moved to group related infom2ation.
For instance, the System Settings for the Attendant Timers are grouped together; not in programming
order.
For ease of reference, a limited number of programmin g items are referenced in more than one place.
Be sure to write the same value in each place. For instance, the Hunt Group No Answer Tier
setting
appears with system parameters and also in the Hunt Group Assignment Table.
When space permits, the related programmin g address is listed with the item. In some cases, the pro-
grarnming address is listed above or below the table.
Some tables show the possible settings including the default settings. The defaults are indicated in
bold type. In some cases, the possible settings are too extensive to list in the tables. This is especially
true for the system timing parameters. Most of the parameters with unlisted settings do not need to
be changed from the default If a change is required, refer to the DBS 824 Section 400,
,,
In many cases, the actual programmin g telephone entq is a 0 or 1
with the
meaning determined by
the item. These are usually listed in parentheses to the right of the possible settings in the tables.
Do not write on the originals! Instead make copies.
Several tables are used repeatedly and may
need
to be copied multiple times.
Issued 8/l/95
DBS 824-10-450

Advertisement

Table of Contents
loading

Table of Contents