Disa Inbound Call Id Code; Disa Outbound Call Id Code 1; Disa Outbound Call Id Code 2 - Panasonic DBS 824 Installation Manual

DISA
Inbound
Call
ID Code
FFl
DISA Inbound Call ID Code
Software
Version :
WC-S
and CPC-M, Version 1.0 and
higher
Address:
FFl 5# (OOOO-9999)##
Description
This program allows you to enter a
DISA ID code. Once a caller has dialed
into the DBS 824 using a DISA trunk, dialing this code provides direct access
to intercom dial tone.
Programming
To set the DISA
ID code . . .
FFl 5## (000019999)#
t
4-Digi't ID Code
To
clear the DISA ID code . . .
I
I
FFl 5## CONF ON/OFF
Related Programming
DISA
Outbound Call ID Code 1: FFl 6# 1# (0000-9999)##
DISA
Outbound Call ID Code 2: FFl 6## 2# (0000-9999)#
DISA Start Time: FF2 (Trunk)# 19#
DISA End Time: FF2 (Trunk)# 20#
DISA Auto Answer: FF2 (Trunk)# ll#
Notes
DZSA Dti Tone. The default setting of the DBS 824 supplies intercom dial
tone to a CO trunk defined as a DISA trunk. If a DISA ID code is stored in
place of the default setting (via remote programming), a DISA
dial
tone
(fast
busy tone) will be heard instead of intercom dial tone.
The
DISA
dial
tone
is a
signal
to proceed
with
your call until you enter the
stored DISA ID code. After the DISA ID code is entered, the intercom dial
tone is presented. This provides the opportunity to make an extension call.
To make an outbound CO trunk call, enter #7, dial 9 or 8 1-86 (to access a CO
trunk), then dial the 4-digit DISA ID code.
I
1-118
DBS 824-10-400 Issued 3/l I95
.