Table of Contents
Advertisement
Key Telephone Features
Line Appearances
l
Both extensions must belong to the same paging group (l-7). Paging group
0 does not allow override.
l
Barge-in for Direct Lines cannot override a DL under the following
conditions:
- When the DL is in a conference call
- When the DL is holding a call.
- When the phone that will be barged into is holding a trunk that does not
appear on an FF key.
For example, if extension 200 wants to barge into a DL that appears on
extension 201, extension 200 cannot barge into the DL if 201 is holding a
trunk that does not appear on an FF key.
Multi-CO (MCO) Appearances
(CPC-S and CPC-M)
Description
MC0 keys will only ring for incoming calls if programed using the "Ring
Assignments". When outside calls come in, the MC0 key flashes green. If a
second outdise cal comes in the a second MC0 key flashes green. If another
extensions answers an outside call, then the MC0 key will stop flashing and
becomes idle.
You can make and receive CO line calls using a Multi-CO (IWO) key.
_-
-- ~AnWCO key-can be assigned to -arty of the pooled trunk groups. See "Pooled .-
--. l'.- --:.: $I$tug&&~.~ss" on page 3-68 for more information.
-. See
"ML/MC0
Separation" (page 3-53) for information on assigning both
&IL and MC0 keys to the same system .
Issued 3/l /95
DBS 824-l O-700
3-51
Advertisement
Chapters
Table of Contents
