Hunt Group Type - Panasonic DBS 824 Installation Manual

FF4
Hunt Group Type
Hunt Group Type
Software
Version: CPC-S and CPC-M, Version 1.0 and higher
Address: FF4 3# (HuntGrp)# 2# (0-2)#
Description Use this program to assign one of the following search methods to a hunt
group:
Terminal Hunt Group Operation
In a terminal hunt group, the hunt begins with the pilot number, and moves
sequentially through the extensions in the hunt group. If all extensions are
busy, the call camps onto the hunt group and waits for an extension to become
idle.
Distributed Hunt Group Operation
In a distributed hunt group, the hunt begins at the extension after the last one
to pick up a call, and continues in a circular manner for successive calls.
Longest Idle Hunt Group Operation
In a longest idle hunt group, the hunt begins at the extension in the group that
has been idle for the longest period of time, and progresses through the other-
extensions in the same manner.
Programming
.
FF y l-4)X 2# '"'i'"
Hunt Group Number
O=Terminal hunting.
CPC-S and CPC-M: l-4
l=Distributed hunting.
2=Longest idle hunting.
Related Programming
Hunt Group Members: FF4 3# (l-4)# (520)# (lo-69 or lOO-699)#
Issued 3/l /95
DBS 824-I O-400
4-9