Trunk Copy - Panasonic DBS 824 Installation Manual

Trunk Copy
Software Version : CPC-S and CPC-M, Version 1 .O and higher
Address: FF9 1# (SourceTrunk)# (TargetTrunk)##
Description
Use this program to copy all the attributes of one trunk to another. Copying
must be done on a trunk-by-trunk basis. The frost trunk number in this
address is the trunk being copiedfrom (the source), and the second trunk
number is the trunk being copied
to (the target).
Programming
Note: You must enter two pound-signs (#kB) at the end of this address.
FF9 1# (I-6 or l-8)# (l-6 or 198)###
f
z
(Source) Trunk Number
(Target) Trunk Number
-
C&i: l-8
Notes
Resb-iction Regarding Priv& Trunks.
This program copies all tmnk
attributes except the Private Trunk Line attribute.
Issued 3/l/95
DBS 824-10-400 9-3