Stop Bit Length (Smdr - Panasonic DBS 824 Installation Manual

FFl
Stop Bit Length (SMDR)
Stop Bit Length (SMDR)
Software Version: CPGS and CPC-M, Version 1 .O and higher
Address: FFl 2# 2# 4## (l-3)#
Description
This program sets the length of the stop-bit parameter for transmitted data
over SMDR serial port CNl.
Programming
Notes
14 bit
2=1.5 bits
. 3=2
bits
Checking Communications Parameters.
Be sure to properly set all
_
communication programming addresses when modifying any single address
value. Communication parameters for SMDR are set with addresses FF12#
2#
1 through 9#.
'Assued 3/l/95 DBS 824-10-400
.Pagel-47