Table of Contents
Advertisement
Trunks and Lines
Analog Extensions
Analog Extensions
Guidelines
l
Analog extensions require the Single Line Telephone Adaptor (SLTA)
(VB-43709). One SLTA supports up to 4 Single Line Telephones.
l
Each SLT extension requires a digital extension port connection to the
SLTA.
installation
1. Remove the cover from the SLTA,
2.
Remove the cable punch-out plate (Figure 4-6) to make an opening for
the cables coming into the SLTA.
To remove the plate, cut the grooves on either side with diagonal cutters.
Then bend the plate back and forth with needle-nose pliers to remove
it.
Figure 4-6. Cable punch-out
tie. SLTA
3. Mount the SLTA to the wall (see Figure 4-7).
Note: Table 4-3 shows the maximum distance the SLTA can be located
from the DBS 824.
l&ued
3/l /95
DBS 824-10-300
4-11
Advertisement
Chapters
Table of Contents
