Table of Contents
Advertisement
FF8
Time Priority Route Tables
Time Priority Route Tables
Software Version: CPCS and CPC-M, Version 1 .O and higher
Address:
FF8 W (l-6)## (l-24)## (1.4)##
Description
When LCR is used, outbound calls are automatically placed on different trunk
groups depending on the time of day. The Time Priority Route Tables
determine which trunks are used during certain times of day. Characteristics
of Time Priority Route Tables are:
l
Table Number.
Tiie Priority Route Tables are identified by numbers l-6.
In DBS 824 programming, the tables are referred to by number.
l
Table Posilion and Priority.
- The "position" of a Time Priority Route Table indicates the time
of day during which it is used. For example, a table assigned to
position "1" is used between 7:00 a.m. and 759 am. Similarly,
a table assigned to position "9" is used between 5:00 pm and
759 pm. LCR provides up to 24 positions for Time Priority
Route Tables.
The 24 positions are divided among 6 time periods; each time period
uses 4 trunk groups. For example, trunk groups assigned to positions l-
4 are used between 7:00 a.m. and 7:59 a.m. The time periods and
positions used are described in the following table:
Table 84.
LCR time periods and positions used
Time Period
Positions Used
7:00 am. - 7:59 am.
l-4
8:00 am. - 4:59 p.m.
5-8
5:00 p.m.
p.m.
- 7:59
9-12
8:00 - 11:59 p.m.
13-16
12:00 am. - 6:59 am.
Weekend
17-20
2 l-24
- The priority of a Time Priority Route Table is determined by its
position. For example, between 8:00 am and 459 pm, position 5
has the highest priority, while position 8 has the lowest priority.
The most cost-effective Time Priority Route Tables are assigned
positions that give them the highest priority. LCR tries to use
the trunks in the highest-priority position first,
l
LCR
Trunk
Group.
Each Tie Priority Route Table is assigned
to an
LCR
trunk group. Because the Tune priority Route Table is assigned to a time of
Issued 3/l 195
DBS 824-l O-400
8-11
Advertisement
Chapters
Table of Contents
