Trunk Disconnect Detection Timer - Panasonic DBS 824 Installation Manual

FF2
Trunk Disconnect Detection Timer
,
Trunk Disconnect Detection Timer
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FF2 (Trunk)# 18# (O-1 5)#
Description
When the trunk side of a CO call disconnects, the CO sends the DBS 824 a
disconnect signal by opening the loop (cutting voltage) for a specified length
of time.
This timer determines how long the DBS 824 expects the disconnect signal to
last If set to default, an open loop of 350 ms or more will be interpreted as a
disconnect signal.
The standard range for CO disconnect signals is 350 to 600 ms.
Programming
I I
FF2 (l-6 or l-8)# 18# (O-15)#
f
t
Trunk Nu&er: Trunk Disconnect Detection Timer
CPC-S: l-6 (Default=7; see the
CPC-M: l-8
following table)
Table 2-2.
Trunk disconnect detection timer
Address
Number Value
0 Ignore disconnect
1 Over 50 ms
-7
Over 100 ms
3
Over 150 ms
4 Over2OOms
5
Over 250 ms
6
Over 300 ms
1
_,
7
Over 350 ms
8
Over 400 ms
9
Over 450 ms
10
Over 500 ms
11
Over 550 ms
12
Over 600 ms
13
Over 650 ms
14
Over 700 ms
15
Over 750 ms
Issued 3/l /95
DBS 824-l O-400
2-l 5