Panasonic DBS 824 Installation Manual page 674

Call Transfer
SLT Features
To use Screened Transfer when Onhook Transfer is disabled:
1. Flash the switchhook to place the outside call on hold.
The phone issues intercom dial tone.
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
. The EXT LED stops flashing and remains lit.
4. Dial "8."
The third party need only pick up the handset to speak to the outside line.
5. Replace the handset..
Related Programming
l
FFl (System): Onhook (Automatic) Transfer
. FFl
(System): Extension Transfer Recall Timer for CO Calls
. FFl (System): Extension Transfer Recall Timer for Intercom Calls
Considerations
l
You cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated.
l
You can transfer a call to an extension that has Call Forwarding activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if phone "A" is covered to phone "B," calls that are
transferred to phone "A" will be forwarded to phone "B."
l
When you transfer a call to an extension that is busy or does not answer
and does not have Call Forwarding activated, a recall tone sounds at your
extension after Transfer Recall Tier expires.
5-16
DBS 824-l O-700
Issued 3/l /95