Custom Screens; Custom Screen Soft-Key Assignment - Panasonic DBS 824 Installation Manual

FFl
Custom Screen Soft-Key Assignment
Custom Screens
Custom Screen Soft-Key Assignment
Software Version: CPC-S and CPCSM, Version 1 .O and higher
Address: FFl 2# 7# 1# (Screen)# (SoftKey)# (Feature)#
Description
Use this program to create up to 15 custom menu screens for large-display
phones. Each screen can contain up to 10 feature codes (one feature code per
soft key). 'Soft keys" are the 10 buttons located on the left and right sides of
the LCD display window on the large-display phone (see figure below). Soft
key 1 is the top left button; soft key 2 is beneath it; and so on.
When creating custom screens, you are programming the soft keys to perform
one of the following special functions while the custom screen is displayed:
l
One-touch access to directories. Pressing the soft key will display a
directory of extension numbers, Personal Speed-Dial numbers, or System
Speed-Dial numbers.
l
One-touch initiation of a specific feature. The soft keys can also execute
any feature operation code except for "Conference" and "Flash", which
already have their own fixed keys on the phone.
After these custom screens are built, you can assign them to display during
different call states (phone idle, intercom dial tone, CO dial tone, during a CO
call, etc.) using another programming address, FF3 (ExtPort)# (26-33)#
(Screen)++. '
When deciding what feature codes to assign to the soft keys on the custom
screens, keep in mind that the DBS 824 system already has 24 prepro-
grammed menus (see Appendix A) that can also be assigned to display during ..
different call states.
Figure
I-I. Soft key number-k on &we-display phones
KeyI
- DND
ow?mE - Key6
Key2 -
BGntlnuKwcK-Key7
Key30MUIE
m
- W8
Ksy4-Fofwm SSD-Key9
Key5 -
WNF LOCKOUT - Key 10 ,
Issued 3/l/95 DBS 824-10-400
l-63