Pooled Trunk Access - Panasonic DBS 824 Installation Manual

Pooled Trunk Access
Key Telephone Features
Pooled Trunk Access
(CPC-S and CPC-M)
Description
The DBS 824 system supports up to eight outside lines. These lines can be
divided into seven Pooled Trunk groups. If you assign an FF key as an MC0
or ML key, the DBS 824 can automatically select an open line from the
Pooled Trunk group assigned to that key.
Even if all the outside lines assigned to an extension are busy, you can access
a free line by choosing an outside line group number. Group numbers 9 and
8 l-86 are available.
Operation
To select a Pooled Trunk group using a pre-programmed FF key:
1. Press the
ON/OFF
key.
l
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
2. Press the ML or MC0 key.
l
The LED of the Pooled Trunk key lights green.
l
The phone issues outside dial tone.
l
"CO TALK #XX" (where "XX" is the line number) appears.
3. Dial the telephone number.
The number appears on the display.
4. Complete the call and replace the handset.
The LED of the ML or MC0 key goes off.
To select a Pooled Trunk group that is not assigned to an FF key:
1. Press the
ON/OFF
key.
l
The phone issues intercom dial tone.
3-68 DBS 824-l O-700
Issued 3/l 195