Panasonic DBS 824 Installation Manual page 582

Key Telephone Features
Flexible Function (FF) Keys
Note: The speed dial code must include the CONF key (to indicate a
trunk call), the appropriate trunk access code, and the outside number.
8. Press the HOLD key.
To assign a Hunt Group pilot number or an extension number to an
FF key:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the FF key to be programmed.
"Enter Code" appears on the display.
4. Enter "72."
5. Enter the Call Forwarding code (0, i, 2, or 4).
6. Enter the Hunt Group pilot number or an extension number.
7. Press the HOLD key.
To erase a code stored in an FF key:
Note: FF keys assigned as CO lines'cannot be cleared using the following
procedure. CO line keys can only be cleared through system programming.
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the FF key to be programmed.
"Enter Code" appears on the display.
4. Press the HOLD key.
"Code Cleared" appears.
To check a programmed FF key:
1. Press the ON/OFF key:
l
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
Issued 3/l /95
DBS 824-l O-700
3-39