Siemens sinumerik 840d Programming Manual page 115

12.98
2
840D 840D
NCU 572
NCU 571
NCU 573
Example of uc.com file −
user cycle description
The explanation is based on the continuation of the
example:
Example:
For the following two cycles a cycle parameterization
is to be newly created:
PROC MY_CYCLE_1 (REAL PAR1, INT PAR2, CHAR PAR3, STRING[10] PAR4)
;The cycle has the following transfer parameters:
;
;PAR1:
;PAR2:
;PAR3:
;PAR4:
;
...
M17
PROC SPECIALCYCLE (REAL VALUE1, INT VALUE2)
;The cycle has the following transfer parameters:
;
;VALUE1:
;VALUE2:
...
M17
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) − 04.00 Edition
2.12 Cycles: Setting parameters for user cycles
810D 840Di
Real value in range -1000.001 <= PAR2 <= 123.456, default with 100
Positive integer value between 0 <= PAR3 <= 999999,
Default with 0
1 ASCII character
String of length 10 for a subprogram name
Real value without value range limitation and default
Integer value without value range limitation and default
Subprograms, Macros
2
2-115