Siemens sinumerik 840d Programming Manual page 523

04.00
15
Identifier Type
$TC_ECP13 REAL
$TC_ECP14 REAL
...
REAL
$TC_ECP21
$TC_ECP23 REAL
$TC_ECP24 REAL
...
$TC_ECP31 REAL
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
Description: System variable/value range/index
Offset for $TC_DP3: $TC_ECP13[t,d] analogous to $TC_DP12[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_ECP13[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
Offset for $TC_DP4: $TC_ECP14[t,d] analogous to $TC_DP13[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_ECP14[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
...
Offset for $TC_DP11: $TC_ECP21[t,d] analogous to $TC_DP20[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_ECP21[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
Offset for $TC_DP3: $TC_ECP23[t,d] analogous to $TC_DP12[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_ECP23[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
Offset for $TC_DP4: $TC_ECP24[t,d] analogous to $TC_DP13[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_ECP24[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
...
Offset for $TC_DP11: $TC_ECP31[t,d] analogous to $TC_DP20[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_ECP31[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
15.2 List of system variables
Part pro
R
R
R
R
R
R
Tables
15
Sync O S
W 5
W 5
W 5
W 5
W 5
W 5
15-523