Siemens sinumerik 840d Programming Manual page 519

04.00
15
Cutting edge data OEM user
Identifier Type
$TC_DPC1 REAL
$TC_DPC2 REAL
$TC_DPCi REAL
REAL
$TC_DPC10
$TC_DPCS1 REAL
$TC_DPCS2 REAL
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
Description: System variable/value range/index
The type can be defined in the machine data. The default is REAL
$TC_DPC1[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DPC1[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
The type can be defined in the machine data. The default is REAL
$TC_DPC2[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DPC2[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
The type can be defined in the machine data. The default is REAL
$TC_DPC [t,d]
i
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DPC [d]
i
t: T number 1–32000
d: Cutting edge number/D number 1–32000
The type can be defined in the machine data. The default is REAL
$TC_DPC10[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DPC10[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
The type can be defined in the machine data. The default is REAL
$TC_DPCS1[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DPCS1[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
The type can be defined in the machine data. The default is REAL
$TC_DPCS2[t,d]
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DPCS2[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
15.2 List of system variables
Part pro
R
R
R
R
R
R
Tables
15
Sync O S
W 2
W 2
W 2
W 2
W 5
.
2
W 5
.
2
15-519