Defining The Protection Zones Cprotdef, Nprotdef - Siemens sinumerik 840d Programming Manual

Protection Zones
4

4.1 Defining the protection zones CPROTDEF, NPROTDEF

840D 840D
NCU 571 NCU 572
NCU 573
4.1 Defining the protection zones CPROTDEF, NPROTDEF
Programming
DEF INT NOT_USED
CPROTDEF(n,t,applim,applus,appminus)
NPROTDEF(n,t,applim,applus,appminus)
EXECUTE (NOT_USED)
Explanation of the commands
DEF INT NOT_USED Locale variable, define data type integer (cf. Chapter 10)
CPROTDEF
NPROTDEF
EXECUTE
Explanation of the parameters
n
t
applim
applus
appminus
NOT_USED
4-140
FM-NC 810D 840Di
Define channel-specific protection zones (for NCU 572/573 only)
Define machine-specific protection zones
End definition
Number of defined protection zone
TRUE = Tool-oriented protection zone
FALSE = Workpiece-oriented protection zone
Type of limit in the 3rd dimension
0 = No limit
1 = Limit in positive direction
2 = Limit in negative direction
3 = Limit in positive and negative direction
Value of the limit in the positive direction in the 3rd dimension
Value of the limit in the negative direction in the 3rd dimension
Error variable has no effect in protection zones with EXECUTE
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) − 04.00 Edition
08.97
4
 Siemens AG 2000. All rights reserved