Oscillation - Siemens sinumerik 840d Programming Manual

04.00
15
15.2.44

Oscillation

Identifier Type
$AA_DTEPW REAL
$AA_DTEPB REAL
$AA_OSCILL_RE REAL
VERSE_POS1
REAL
$AA_OSCILL_RE
VERSE_POS2
REAL
$AA_DELT
$P_FA REAL
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
Description: System variable/value range/index
$AA_DTEPW[X]
Axial distance-to-go for infeed oscillation in
workpiece coordinate system
This variable can only be accessed from synchronized actions
Axes: Channel axis
$AA_DTEPB[X]
Axial distance-to-go for infeed oscillation in basic coordinate system
This variable can only be accessed from synchronized actions
Axes: Channel axis
$AA_OSCILL_REVERSE_POS1[X]
Current reversal position 1 for oscillation
In synchronized actions, the setting data value
$SA_OSCILL_REVERSE_POS1 is evaluated online
This variable can only be accessed from synchronized actions
Axes: Channel axis
$AA_OSCILL_REVERSE_POS2[X]
Current reversal position 2 for oscillation
In synchronized actions, the setting data value
$SA_OSCILL_REVERSE_POS2 is computed online
This variable can only be accessed from synchronized actions
Axes: Channel axis
$AA_DELT[X]
Latched axial residual path distance in workpiece coordinate system
after axial delete distance-to-go with motion-synchronized actions
Axes: Geometry axis, channel axis, machine axis
$P_FA[X]
Axis feed last programmed
Axes: Channel axis
15.2 List of system variables
Part pro
RS
RS
RS
RS
R
Tables
15
Sync O S
R 2
R 2
R 3
R 3
R 2
2
15-563