Siemens sinumerik 840d Programming Manual page 498

Tables
15
15.1 List of instructions
10
M1 Optional stop
10
M2 Program end, main program with reset to program start
M3 Clockwise spindle rotation for master spindle
M4 Counter-clockwise spindle rotation for master spindle
M5 Spindle stop for master spindle
M6 Tool change
10
M17 End of subprogram
M19 Spindle positions
10
M30 Program end, as for M2
M40 Automatic gear change
M41... M45 Gear stage 1, ..., 5
M70 Transition to axis operation
MCALL Modal subprogram call
MEAC Continuous measurement without
deletion of distance-to-go
MEAFRAME
Frame calculation from measuring points
MEAS Measurement with touch trigger probe
(measure)
MEASA Measurement with deletion of distance-to-
go
MEAW Measurement with touch trigger probe
without deletion of distance-to-go
(measure without deleting distance-to-go)
MEAWA Measurement without deletion of
distance-to-go
MI Access to frame data: Mirroring
MINDEX Define index of character in input string
MIRROR Programmable mirror
MMC Command to MMC command interpreter
MOD Modulo division
MOV Start positioning axis
(start moving positioning axis)
MSG Programmable messages
N Subblock number
15-498
Without subprogram
name: Deselection
Integer,
without sign
FRAME
Integer,
without sign
Integer,
without sign
0, ..., String: Parameter
INT 1, character:
Parameter 2
STRING
Real
0, ..., Can be used to
9999 9999 identify blocks with
integer a number; position
values only, at beginning of
no sign block
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
12.98
MIRROR X0 Y0 Z0
; separate block
MSG("message")
E.g. N20
 Siemens AG 2000. All rights reserved
15
s
s
s
s
s
s 3
m