Siemens sinumerik 840d Programming Manual page 517

04.00
15
Identifier Type
$TC_DP17 REAL
$TC_DP18 REAL
REAL
$TC_DP19
REAL
$TC_DP20
$TC_DP21 REAL
$TC_DP22 REAL
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
Description: System variable/value range/index
$TC_DP17[t,d]
Slotting saw: Wear – Length – $TC_DP8
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DP17[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
$TC_DP18[t,d]
Wear – Reserved – $TC_DP9
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DP18[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
$TC_DP19[t,d]
Wear – Angle between face of tool and torus surface – $TC_DP10
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DP19[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
$TC_DP20[t,d]
Wear – Angle between tool longitudinal axis and upper end of torus
surface – $TC_DP11
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DP20[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
$TC_DP21[t,d]
Base – Length 1
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DP21[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
$TC_DP22[t,d]
Base – Length 2
With active 'Flat D number management' function, the syntax is as
follows:
$TC_DP22[d]
t: T number 1–32000
d: Cutting edge number/D number 1–32000
15.2 List of system variables
Part pro
R
R
R
R
R
R
Tables
15
Sync O S
W 2
W 2
W 2
W 2
W 2
W 2
15-517