Special Functions For Oem Users - Siemens sinumerik 840d Programming Manual

04.00
5
840D 840D
NCU 571 NCU 572
NCU 573
5.8

Special functions for OEM users

OEM addresses
The meaning of OEM addresses is determined by
the OEM user.
Their functionality is incorporated by means of
compile cycles. 5 OEM addresses are reserved.
The address identifiers are settable.
OEM addresses can be programmed in any block.
OEM interpolations
The OEM user can define two additional
interpolations. Their functionality is incorporated by
means of compile cycles.
The names of G functions (OEMIPO1, OEMIPO2) are
set by the OEM user.
OEM addresses (see above) can be used
specifically for OEM interpolations.
Reserved G groups G800 − 819
Two G groups with 10 OEM G functions each are
reserved for OEM users.
These allow the functions incorporated by an
OEM user to be accessed for external
applications.
Functions and subprograms
OEM users can also set up predefined functions and
subprograms with parameter transfer.
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) − 04.00 Edition

5.8 Special functions for OEM users

810D 840Di
CCU 2
Special Motion Commands
5
5-187