Table of Contents
Advertisement
(b)
Checking the memory capacity after formatting
Select [Online]
1) Select "Memory card (RAM)" or "Memory card (ROM)" in "Target memory" on the Read from PLC screen.
2) Click the
3) The memory capacity appears in "Total free space volume".
(3)
Writing to the memory card
The following describes the operations before writing and the methods for writing.
(a) Writing to the SRAM card or the ATA card
Select [Online]
• When writing data to the SRAM card, select "Memory card (RAM)" in "Target memory" on the Write to PLC
screen.
• When writing data to the ATA card, select "Memory card (ROM)" in "Target memory" on the Write to PLC
screen.
5 - 16
[Read from PLC] in GX Developer.
button.
Free space volume
1) Select the target memory.
2) Click the
Free space volume button.
Figure 5.13 Procedure for checking the memory capacity
[Write to PLC] in GX Developer.
Figure 5.14 Write to PLC screen
3) The memory capacity
value is shown.
Advertisement
Table of Contents
