Mitsubishi Electric melsec q00ujcpu User Manual page 327

(5) Device
Number of points, latch range, and local device range are set for each device.
Parameter
Item
No.
*1
2000
Device points
Latch (1) start/end (Latch
2001
*2
clear valid)
Latch (2) start/end (Latch
2002
*2
clear invalid)
*6
2003
Local device start/end
8 - 7
Figure 8.5 Device
Table8.5 Device setting list
Description
Set the number of device points
H
that is appropriate to the system.
Set a latch range (start and end
device numbers), which can be
H
cleared by remote latch clear
operation.
Set a latch range (start and end
device numbers), which cannot be
H
cleared by remote latch clear
operation.
Set a range (start and end device
numbers), which is used for a
H
local device.
Setting range
*3
X (8K), Y (8K), and S (8K) are fixed.
Setting is available within the range of
29K words in total, including the above
fixed points (1.5K words).
• One device: Up to 32K points
• Total bit device points: Up to 64K
points
Setting is available for only one range
for each of B, F, V, T, ST, C, D, and W
devices.
Setting is available for only one range
for each of L, B, F, V, T, ST, C, D, and W
devices.
Setting is available for only one range
for each of M, V, T, ST, C, D, and Z
*5
devices.
Default Reference
• X: 8K
• Y: 8K
• M: 8K
*2
• L: 8K
• B: 8K
• F: 2K
• SB: 2K
• V: 2K Section 9.1
*3
• S: 8K
• T: 2K
• ST: 0K
• C: 1K
• D: 12K
• W: 8K
• SW: 2K
Blank Section 3.4, 6.3
Blank Section 3.4, 6.3
Blank Section 9.14.2
(To the next page)