Mitsubishi Electric melsec q00ujcpu User Manual page 324

Parameter
Item
No.
Common pointer No. 1005
H
Points occupied by
1007
H
empty slot
System Fixed scan
interrupt interval (n: 1008
H
settings 28 to 31)
Interrupt program/Fixed
1008
H
scan program setting
Service processing
1013
H
setting
PLC module change
setting (PLC module 1017
H
change setting)
Table8.2 PLC system setting list (continued)
Description
Set the start number of common pointers.
Set the number of points for empty slots
on the main/extension base units.
Set each execution interval for the
interrupt pointers (I28 to I31).
Enable or disable high speed execution
of interrupt programs or fixed scan
execution type programs.
Select any of the following options.
• Execute the process as the scan time
proceeds.
• Specify service process time.
• Specify service process execution
counts.
• Execute it while waiting for constant
scan time setting.
Set items required when performing the
CPU module change with memory card
function.
Setting range
P0 to 4095 Blank
0, 16, 32, 64, 128, 256, 512, or
16 points
1024 points
• I28: 100.0ms
0.5ms to 1000ms • I29: 40.0ms
(in increments of 0.5ms) • I30: 20.0ms
• I31: 10.0ms
Selected/deselected Deselected
• 1 to 99% (in increments of
1%)
Execute the
• 1 to 10 (in increments of 1
process as the
time)
scan time
• 0.2 to 1000ms (in increments
proceeds.: 10%
of 0.1ms)
• Blank
• Backup start setup contact
• Backup start contact
Blank
• Backup target data
• Title setting
CHAPTER8 PARAMETERS
Default Reference
Section 9.10.2
Section 3.2.2
Section 9.11
Section 2.2.3,
2.3.4
Section 6.24.1
Section 6.30
8 - 4
1
2
3
4
5
6
7
8