Table of Contents
Advertisement
(9) Batch transfer of data to the program memory
When data in the program cache memory is batch-transferred to the program memory by GX Devel-
oper, the processing time shown in Table10.26 is required.
*1: The time in the table is for the case where the service processing count is set to one.
Table10.26 Processing time (when data is batch-transferred to the program memory)
CPU module
Q00UJCPU, Q00UCPU, Q01UCPU
Q02UCPU
Q03UDCPU, Q03UDECPU
Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU, Q04UDEHCPU, Q06UDEHCPU,
Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU
(10) Diagnostics of the
When the "Diagnose redundant power supply system." is selected on the PLC RAS tab of the PLC
parameter dialog box, the processing time shown in
Table10.27 Processing time (when the diagnostics for the redundant power supply system is enabled)
CPU module
Q00UCPU
Q01UCPU
Q02UCPU
Q03UDCPU, Q04UDHCPU, Q06UDHCPU, Q10UDHCPU,
Q13UDHCPU, Q20UDHCPU, Q26UDHCPU, Q03UDECPU,
Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU, Q13UDEHCPU,
Q20UDEHCPU, Q26UDEHCPU
*1: A power supply module failure indicates any of the following.
The redundant power supply module has failed.
Power for the redundant power supply module is turned off.
The redundant power supply module is not mounted.
Scan time = 2ms
redundant power supply system
With a power supply module
CHAPTER10 CPU MODULE PROCESSING TIME
*1
Processing time
1.90ms
1.55ms
1.10ms
1.05ms
.
Table10.27 is required
Processing time
Without a power supply module
*1
failure
s
125
s
125
s
90
s
43
Scan time = 20ms
4.90ms
4.50ms
3.65ms
3.65ms
*1
failure
s
165
s
135
s
90
s
52
10 - 17
1
10
3
4
5
6
7
8
Advertisement
Table of Contents
