Table of Contents
Advertisement
(5) Function execution time in END processing
This is the time required for updating calender or clearing error in END processing.
(a) Calendar update processing time
When the clock data set request (SM210 changes from off to on) or the clock data read request
(SM213 turns on) is issued, the processing time for changing or reading the clock data is required in
END processing.
Q00UJCPU, Q00UCPU, Q01UCPU
Q02UCPU
Q03UDCPU, Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU, Q03UDECPU, Q04UDEHCPU,
Q06UDEHCPU, Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU,
Q26UDEHCPU
(b) Error clear processing time
Upon the rising edge (changes from off to on) of SM50 (Error reset), the processing time for clearing the contin-
uation error stored in SD50 is required.
Q00UJCPU, Q00UCPU, Q01UCPU
Q02UCPU
Q03UDCPU, Q03UDECPU
Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU, Q04UDEHCPU, Q06UDEHCPU,
Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU
10 - 8
Table10.10 Calendar update processing time
CPU module
Table10.11 Error clear processing time
CPU module
Processing time in END processing
When the clock data set
request is issued
0.040ms
0.040ms
0.011ms
Processing time in END processing
When the error is cleared
(the one detected by the
annunciator)
0.185ms
0.180ms
0.068ms
0.065ms
When the clock data read
request is issued
0.019ms
0.019ms
0.004ms
When the error is cleared
0.185ms
0.175ms
0.062ms
0.062ms
Advertisement
Table of Contents
