Table of Contents
Advertisement
5.1.8 Operating the program in the memory card (boot operation)
This section describes methods for operating the program stored in the memory card.
(1) Operating the program in the memory card
To operate the program stored in the memory card, make setting so that the program is booted to the program
memory after the CPU module is powered off and then on or is reset. (
The program whose file name is specified in the Boot file tab is booted from the memory card to the program
memory after the CPU module is powered off and then on or is reset.
(2) Bootable files, transfer source, and transfer destination
Table Table5.5 provides the combinations of bootable file, transfer source, and transfer destination.
Table5.5 Combinations of bootable file, transfer source, and transfer destination
File name
Parameter
Sequence program
Device comment
Initial device value
Label program
CHAPTER5 MEMORIES AND FILES USED FOR CPU MODULE
Program
memory
Boot
CPU module
Memory card
Figure 5.20 Boot operation
Transfer source
Memory card
(3) in this section, (4))
Transfer destination
Program memory
Standard ROM
: Bootable,
1
2
3
4
5
6
7
8
: Cannot be booted.
5 - 23
Advertisement
Table of Contents
