Mitsubishi Electric melsec q00ujcpu User Manual page 325

(3) PLC file
Parameters required for the files used in the CPU module are set.
Item
*1
File register
Transfer to Standard ROM at
*1
Latch data backup operation
Comment file used in a
command
Initial Device value
*1
File for local device
File use for SP.DEVST/S.DEVLD
instruction
*1: Not available for the Q00UJCPU.
8 - 5
Figure 8.3 PLC file
Table8.3 PLC file setting list
Parameter
Description
No.
Set a file for the file register used in
1100
H
the program.
Select whether to batch-transfer
the data in the file register at the
1104
H
time of latch data backup to the
standard ROM.
Set a file for device comments
1101
H
used in the program.
Set a file for initial values of the
1102
H
devices used for the CPU module.
Set a file for local devices used in
1103
H
the program.
Set a device data file used for
1105 writing to or reading from the
H
standard ROM.
Setting range
• Not used
• Use the same file name as the
program.
• Use the following file.
Checked/unchecked
• Not used
• Use the same file name as the
program.
• Use the following file.
• Not used
• Use the same file name as the
program.
• Use the following file.
• Not used
• Use the following file.
• Not used
• Use the following file.
Default Reference
Not used Section 9.7
Not selectable Section 6.27
Not used
-
Not used Section 6.25
Not used Section 9.14.2
Not used Section 6.28