Reference To The Nodeb Commissioning Interface; Interface Description: Nodeb Commissioning - Huawei 3900 Series Commissioning Manual

3900 Series Multi-Mode Base Station
Commissioning Guide
Parameter
Uplink GPRS Verification
Downlink GPRS Verification

5.13 Reference to the NodeB Commissioning Interface

This section describes the interfaces and parameters for NodeB commissioning and facilitates
you to perform relevant operations for NodeB commissioning.

5.13.1 Interface Description: NodeB Commissioning

This section describes the NodeB Auto Deployment window during NodeB commissioning.
You can learn about the components of this window.
5.13.2 Parameters of the NodeB Deployment List
The NodeB deployment list records the parameter information required for NodeB
commissioning. After the NodeB deployment list is imported to the M2000, the M2000 can
automatically commission the NodeBs in the NodeB deployment list.
5.13.1 Interface Description: NodeB Commissioning
This section describes the NodeB Auto Deployment window during NodeB commissioning.
You can learn about the components of this window.
NodeB Auto Deployment window-NodeB List tab page
On the M2000 client, you can choose Configuration > Auto Deployment > NodeB Auto
Deployment to open the NodeB auto-deployment window. By default, NodeB List tab page is
displayed in the NodeB auto-deployment window, as shown in
Issue 02 (2010-07-30)
NOTE
If the values of SDCCH Verification and TCH Verification are not 0, you can infer that the
l
corresponding CS service verification succeeds.
If the values of Uplink GPRS Verification and Downlink GPRS Verification are not 0, you can infer
l
that the corresponding PS service verification succeeds.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the MBTS in GL or UL Mode on the
Description
If the value is not 0, you can infer that the
counter meets the requirement.
If the value is not 0, you can infer that the
counter meets the requirement.
Figure
M2000
5-16.
5-51