Table of Contents
Advertisement
5 Commissioning the MBTS in GL or UL Mode on the
M2000
whose service verification result you want to view and then choose Open Service Verification
Window from the shortcut menu to open the corresponding tab page.
Figure 5-18 NodeB Auto Deployment window-Validate tab page
No.
1
2
5.13.2 Parameters of the NodeB Deployment List
The NodeB deployment list records the parameter information required for NodeB
commissioning. After the NodeB deployment list is imported to the M2000, the M2000 can
automatically commission the NodeBs in the NodeB deployment list.
Table 5-11
Table 5-11 Parameters in the NodeB deployment list
Parameter
RNC ID
5-54
Description
Verification objects, that is, all the logical cells of the NodeB to be commissioned.
Verification result. This area displays the accumulated values of all the performance counters
that are verified during service verification.
describes the parameters in the NodeB deployment list.
NOTE
If the CME is deployed and the initial configuration of the NodeB is finished by using the CME,
l
exporting the NodeB deployment list from the CME is recommended. For the detailed operations, see
the Exporting the Deployment List and Configuration Files of Physical NodeBs section in the
online help. The principles of exporting parameters using the CME are listed as follows:
The planned information must be exported from the CME.
l
The unplanned information cannot be exported from the CME.
l
If the CME is not deployed, export the template of NodeB deployment list from the NodeB Auto
l
Deployment window on the M2000 client. For the detailed operation, see
Commissioning
Task.
Description
ID of the RNC to which the NodeB belongs
This parameter must be exported from the CME. It is not configurable
in the NodeB Auto Deployment window.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
5.2.2 Creating a NodeB
Issue 02 (2010-07-30)
Hide quick links:
Advertisement
Table of Contents
