Huawei 3900 Series Commissioning Manual page 47

3900 Series Multi-Mode Base Station
Commissioning Guide
Step
2. The M2000
checks whether
the MBTS
services are
running normally
according to the
values of the
performance
counters.
Procedure
Step 1 Choose Configuration > Auto Deployment > MBTS Auto Deployment. The MBTS Auto
Deployment window is displayed.
Step 2 View the service verification results of the MBTS.
1.
2.
Issue 02 (2010-07-30)
Description
If each GBTS and NodeB performance
counter once has a non-zero value, the
M2000 considers that the service
verification is successful. At this time, the
status of the commissioning task changes to
, that is, waiting for you to manually
confirm the completion of the
commissioning. Otherwise, the
commissioning task remains at the service
verification stage.
In MBTS List, select an MBTS whose service verification results need to be viewed, and
then click on the toolbar. The service verification window is displayed.
NOTE
If you select an MBTS to view the service verification results, you can view the results on both
l
the GBTS side and the NodeB side.
You can also choose to view only the service verification results on the GBTS side or the NodeB
l
side. In the GBTS List or NodeB List area of the MBTS Auto Deployment window, right-click
a record, and then choose Open Service Verification Window from the shortcut menu. The
service verification window of the GBTS or NodeB is displayed.
View the service verification results and perform corresponding operations.
The accumulated values of the counters, which are collected in the time range between the
start of the service verification and the restart of the commissioning or the confirmation of
the commissioning completion, are displayed in the service verification window.
If the value of each counter is once displayed as
l
can infer that the service verification is successful. Confirm whether to complete the
commissioning.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning the MBTS in GU Mode on the M2000
(indicates a non-zero value), you
Operation Performed
by Users
If the commissioning
l
task is in the state,
you need to check
whether the
commissioning is
complete. For details,
see 4.7 Confirming
the Completion of
MBTS
Commissioning.
If the commissioning
l
task remains at the
service verification
stage, it is
recommended that you
view the service
verification results to
obtain the actual
performance data.
4-21