Preparing For Mbts Commissioning; Table 4-1 Preparing For Mbts Commissioning (In Case Of New Deployment Of Both Gbts And Nodeb) - Huawei 3900 Series Commissioning Manual

4 Commissioning the MBTS in GU Mode on the M2000
Procedure
Step 1 Create an MBTS commissioning task by referring to
Task.
Step 2 Perform operations according to whether Intervene Transmission is selected when a
commissioning task is created.
If...
Intervene Transmission is selected when a
commissioning task is created,
Intervene Transmission is not selected
when a commissioning task is created,
Step 3 Check the transmission state and rectify faults (if any) manually. For details, see
Intervening the MBTS Transmission
Step 4 The M2000 automatically commissions the MBTS. For details on the commissioning process,
see
process, view the commissioning progress, rectify faults (if any) to ensure that the
commissioning is successful. For details, see
Step 5 After the MBTS service verification passes, the commissioning status is displayed
that the MBTS commissioning is completed. For details, see
of MBTS
Step 6 Obtain the MBTS commissioning report. For details, see
Commissioning
----End

4.2 Preparing for MBTS Commissioning

This section describes how to prepare for MBTS commissioning.
Prepare for MBTS commissioning by referring to
Table 4-1 Preparing for MBTS commissioning (in case of new deployment of both GBTS and
NodeB)
Step
1
2
3
4-4
4.5 Automatic Commissioning of the MBTS on the
Commissioning.
Report.
Operation
Check that the MBTS hardware, such as the cabinets, cables, antenna system, and
auxiliary devices, is installed and passes the installation check. In addition, check
that the MBTS is powered on and passes the power-on check.
Check that the controller hardware is installed and commissioned successfully and
the controller runs normally. In addition, check that the negotiation data of the
base station to be commissioned is configured and recorded.
Check that the M2000 is commissioned, that the M2000 is connected to the
corresponding controller, and that the configuration synchronization is completed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
4.3 Creating an MBTS Commissioning
Then...
Go to Step 3.
Go to Step 4.
Detection.
M2000. During the commissioning
4.6 Monitoring the MBTS
4.7 Confirming the Completion
4.8 Obtaining the MBTS
Table 4-1.
Commissioning Guide
4.4 Manually
Commissioning.
. Check
Issue 02 (2010-07-30)