Table 4-9 Parameters For The Mbts Deployment List - Huawei 3900 Series Commissioning Manual

3900 Series Multi-Mode Base Station
Commissioning Guide

Table 4-9 Parameters for the MBTS deployment list

Parameter Field
GU ID
Auto Deployment
Type
RNC ID
RNC Name
NodeB ID
NodeB Name
NodeB ESN1
NodeB ESN2
Issue 02 (2010-07-30)
NOTE
If the CME is deployed, and you has used the CME to initially configure the MBTS, you are
l
recommended to export the MBTS deployment list through the CME.For details, see Exporting the
MBTS deployment list and configuration file in the online help. The principles for the CME to export
the information about the parameter fields are as follows:
If the parameter is configured, the CME exports the value of the parameter.
l
If the parameter is not configured, the CME cannot export the value of the parameter.
l
If the CME is not deployed, you can export the template of the MBTS deployment list template the
l
MBTS Auto Deployment window in the M2000 client. For details, see
Commissioning Task (Deploying Both the GBTS and the
Commissioning Task (Deploying a NodeB When the GBTS Is Normal)
Commissioning Task (Deploying a GBTS When the NodeB Is
Description
GU ID.
The value of this parameter is mandatory to be exported, and the
parameter cannot be edited in the MBTS Auto Deployment window.
ID of the type of the commissioning MBTS.
The value of this parameter is mandatory to be exported, and the
parameter can be edited in the MBTS Auto Deployment window (If
the CME cannot export the value of this parameter, you need to edit
it manually).
ID of the RNC to which the NodeB belongs
The value of this parameter is mandatory to be exported, and the
parameter cannot be edited in the MBTS Auto Deployment window.
Name of the RNC to which the NodeB belongs.
The value of this parameter is mandatory to be exported, and the
parameter cannot be edited in the MBTS Auto Deployment window.
eNodeB ID.
The value of this parameter is mandatory to be exported, and the
parameter cannot be edited in the MBTS Auto Deployment window.
Name of the NodeB.
The value of this parameter is mandatory to be exported, and the
parameter cannot be edited in the MBTS Auto Deployment window.
Electronic serial number of the NodeB active control board (If the
parameter is configured, the value is mandatory to be exported).
The value of this parameter is optional to be exported, and the
parameter cannot be edited in the MBTS Auto Deployment window.
Electronic serial number of the NodeB standby control board (If the
parameter is configured, the value is mandatory to be exported).
The value of this parameter is optional to be exported, and the
parameter cannot be edited in the MBTS Auto Deployment window.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning the MBTS in GU Mode on the M2000
NodeB),
4.3.1 Creating an MBTS
4.3.2 Creating an MBTS
or 4.3.3 Creating an MBTS
Normal).
4-27