Arranging The Usb Disk For Local Enodeb Commissioning - Huawei 3900 Series Commissioning Manual

6 Commissioning the MBTS by Using USB and M2000
2.
----End

6.2.3 Arranging the USB Disk for Local eNodeB Commissioning

Before the local eNodeB commissioning through the USB storage device, you need to save the
required files in a specified directory in the USB storage device.
Prerequisite
l
l
l
l
l
Context
When the security GW is deployed in the network, the eNodeB and the security GW need to
identify each other through the digital certificate. Therefore, the digital certificate is required
for the eNodeB commissioning. The digital certificate on the eNodeB side incorporates the
operator's cross certificate signed by Huawei, operator's root certification authority (CA)
certificate (or CA certificate chain with the root CA certificate), and operator's certificate
6-8
Obtain the NodeB software package from the support website.
l
The data configuration file can be made and exported through the CME. This is usually
l
performed by configuration engineers.
Store the files according to the following path.
File
NodeB software
Data configuration file
CAUTION
After you have downloaded the file from the PC into the USB disk, unplug the USB disk
according to the system prompt. If not, errors may occur when you use the USB disk.
The operator already obtains the cross certificate signed by Huawei if cross certification is
used.
NOTE
Before Huawei signs the cross certificate for the operator, the operator is required to provide the
request file of cross certificate for Huawei. The request file of cross certificate is in format of
PKCS#10, which is generated by the operator's root CA certificate, or the operator's child CA
certificate that is used for the certification of eNodeB, security GW, and M2000.
The CR/CRL database is deployed on the server of the DeMilitarized Zone (DMZ) of the
operator, and supports FTP. Thus, the files on the CR/CRL database can be downloaded
in FTP mode.
The USB storage device is ready.
The eNodeB software package and data configuration file are available.
When the security GW is deployed on the network, the common configuration file and
digital certificate to be imported to the eNodeB are saved in the USB storage device.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
Specified Path of the USB Storage
Device
\\NodeB\Software\Software.csp
\\NodeB\Configuration\NodeBCfg.xml
Issue 02 (2010-07-30)