Creating An Mbts Commissioning Task (Deploying A Nodeb When The Gbts Is Normal) - Huawei 3900 Series Commissioning Manual

4 Commissioning the MBTS in GU Mode on the M2000
Step 5 In MBTS List, select an MBTS to be commissioned, and then click
Customize Process dialog box is displayed.
Option
Manual
Transmission
Detection
Intervention Is
Required
Manual
Transmission
Detection
Intervention Is
Not Required
Step 6 Click OK. The M2000 starts commissioning the MBTS automatically.
M2000, see
----End
Postrequisite
During the commissioning, you can monitor the MBTS commissioning status through the
M2000 to handle commissioning exceptions in time and ensure that the commissioning can be
performed successfully. For details, see
Commissioning
4.3.2 Creating an MBTS Commissioning Task (Deploying a NodeB
When the GBTS Is Normal)
This section describes how to create an MBTS commissioning task when the GBTS is normal
and you need to deploy a NodeB. After making MBTS commissioning preparations, you can
create an MBTS commissioning task on the M2000 and enable the M2000 to commission the
MBTS automatically.
Prerequisite
l
l
l
Context
The M2000 can commission a maximum of 500 base stations at a time, where one MBTS is
equal to two base stations (the NodeB and the GBTS are not differentiated).
4-8
Description
1. Select the check box in front of Intervene Transmission.
2. Perform
For details about how to manually intervene GBTS transmission
detection, see
Detection.
Perform
4.5 Automatic Commissioning of the MBTS on the
Task.
The M2000 client is started.
MBTS commissioning preparations are complete.
The controller to which the MBTS to be commissioned belongs is properly connected to
the M2000.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
step 6.
4.4 Manually Intervening the MBTS Transmission
step 6.
4.6.1 Viewing the Progress and Status of an MBTS
3900 Series Multi-Mode Base Station
Commissioning Guide
on the toolbar. The
M2000.
Issue 02 (2010-07-30)